TROYA Oil and Gas Engineering has successfully completed manufacturing of a Vertical Emulsion Breaker and commissioning for the oil field in Siverek, Şanlıurfa. Treater helps to effectively remove water and emulsion from crude oil well streams. Flow enters the internal heat exchanger for pre-heating. Preheated crude oil enters the top of the treater into a gas separation section and strikes the inlet diverter to create centrifugal action. This allow gas to separate from the liquid and flow upward through the stainless steel filter to the gas outlet. Oil and water also flow through a downcomer to the base of the treater. Oil and entrained water rise around the firebox, which is heated by burner, to a coalescing section where sufficient retention time is provided to allow the small water particles in the oil continuous phase to coalesce and settle to the bottom. Treated oil flows out from the nozzle, which is located in the upper part of the equipment, with a desired level by using a dump valve. Water is removed from the bottom part of the treater through an externally adjustable water siphon and lever operated dump valve. The vertical emulsion breaker manufactured body has a diameter of 3050 mm and a length of 8500 mm.
For more information about Vertical Emulsion Breaker, please visit our brochure (III Phase Vertical Heater Treater).
